A failed tank heater calls for a plumber able to pull the permit, place the new unit, strap it, hook up gas or power and carry off the old one, frequently all in a single working day. We pass your request to a local plumbing business. The water heater page covers repairs and other options if replacement is not yet certain.
What happens during a water heater swap?
First the water and fuel go off, then the old tank is drained and disconnected. The new tank goes onto a pan or stand, and the water, gas or electric lines are connected. The plumber also installs a relief valve with a discharge pipe, straps the tank, checks for leaks, starts the unit and removes the old one. Request a time window, since visit length depends on the job.
Before the visit, make room near the heater, mention any leaks you know of, and keep the old unit's label within reach. The size and fuel type on that label help match a new heater. If the house has had hard water for years, the drain valve may be seized, and the plumber may need to cut and replace it.
A few items belong on the quote: the size of the new heater and the maker's warranty, the venting, flexible connectors, an expansion tank if one is needed, the permit, and removal of the old unit. If a line is missing, ask. Extras at the end are what turn a fair price into a bad one.
Is a permit required for a heater swap in Riverside?
In Riverside a new water heater generally needs a permit, since the job involves gas, venting and plumbing systems. The City's exempt-work list covers faucet and toilet repair but not water heaters. Verify with City Building and Safety at (951) 826-5800. Permit work also falls under California's contractor license rules.
A permit brings an inspection, which looks at items like the relief valve, vent, strapping and gas connection. It protects you if something is wrong. For Moreno Valley addresses the Building and Safety line is (951) 413-3350, and the city says the 2025 California codes took effect January 1, 2026. We did not verify a specific water heater permit rule for Moreno Valley or Loma Linda, so ask the plumber how they handle it.
For unincorporated addresses such as parts of Highgrove or Mead Valley, the permit office may be the County of Riverside Building and Safety at (951) 955-1800. Check your address.
Must a water heater be strapped in California?
Yes. State rules call for a water heater to be anchored, braced or strapped so an earthquake does not topple it. Two straps are a common method, placed so the bottom one sits no less than four inches over the controls, though the plumber follows the plumbing code and the inspector decides. The plumber should do this at replacement and the inspector may check it.
An unstrapped tank can tip in a quake and rupture its gas or water line. If your existing heater has no straps, you can add them even if you are not replacing it, as strapping kits are sold in hardware stores. A plumber can add them. The next safety upgrade is covered on the earthquake gas valve page for the next safety upgrade.
What is the price of a plumber-installed water heater?
Guides put the overall average near $1,950, with a typical range of $1,600 to $5,400 (This Old House, updated June 17, 2026). Tank models run $1,200 to $2,300 installed in the same guide. Fixr lists a gas tank at $1,000 to $2,700 and an electric tank at $800 to $1,500. They are national figures, not local rates; the written quote sets the price.
Cost differences come from the size of the tank, the fuel, the venting, how much old piping needs to be replaced, and whether the code requires upgrades. Swapping a tank heater for a tankless one is a bigger job; see tankless installation. The full breakdown is in water heater replacement cost.
Is repair or replacement the better choice?
A young tank with a failed part, say a thermostat, element or thermocouple, is worth repairing. Replace it if the shell leaks, the base is rusted, it has lived out its usual lifespan, or it keeps needing fixes. A tank that leaks through its walls cannot be mended.
Have the plumber give you both prices together, one for repair and one for replacement, and read the age from the date code on the label. Hard water can shorten a tank's life through scale. Riverside Public Utilities' 2025 report lists hardness averaging 197 mg/L, about 12 grains per gallon, so tank maintenance matters for homes on that supply.
A heater leaking right now needs its cold supply closed and its gas or breaker turned off. After that, emergency water heater repair explains how to cope until help arrives.
Which questions come before I book?
Request the contractor license number. Find out if the quote covers the permit, haul-away, strapping, relief valve and code upgrades, how many hours the work will take, and the coverage of the maker's warranty. Also ask which brand and size they plan to use, and why that fits your household.
A plumber who explains choices instead of pushing one product is usually a better fit. For gas heaters, ask about venting and the gas shutoff. For electric heaters, ask whether the circuit and wire gauge suit the new unit. Put the answers in writing.
What to do next
Look at the label on your heater and note its size in gallons, the fuel and the age. Locate the shutoff valves and the gas valve. Take a picture of the area. Decide whether the household can tolerate a half day without hot water. Send a request and we will forward it to a local plumbing business.
See the home page for all the services we cover. If the problem is hot water that is simply cold at one tap, see shower with no hot water first.
When is it time to call a plumbing business?
Reach out if the base of the tank leaks, the unit rumbles loudly, the water stays rusty or lukewarm for days, or the pilot keeps going out. A gas smell calls for action at once: exit the building, ring SoCalGas at 1-800-427-2200 from outdoors, and use 911 if you feel unsafe.
Do not replace a gas water heater yourself. Gas connections and venting need a permit, and California rules also require a contractor license, and one error can lead to a gas leak or carbon monoxide.
Common questions
How many hours should a heater replacement take?
What should I put to a plumber before replacement?
Do I need an adult home while the work is done?
Is a bigger tank always better?
Sources used
- This Old House, How Much Does Water Heater Installation Cost? (2026), updated June 17, 2026
- Fixr, How Much Does a Gas Water Heater Cost in 2026?, updated January 30, 2026
- Fixr, Electric Water Heater Installation Cost in 2026, updated January 27, 2026
- City of Riverside, work exempt from building permits
- City of Riverside Building and Safety, contact
- California Contractors State License Board
Page updated