Finding a leak and fixing a leak are billed as two jobs, and the second one varies wildly with where the pipe sits. Locating a hidden leak costs $150 to $600 in the guides we read, and fixing it ranges from a couple of hundred dollars beneath a sink to several thousand when the pipe is inside a wall or beneath a slab. All of those are national figures, not Riverside rates. For the bigger picture, see the leak hub.
Below you will find the ranges, what drives them and tips for comparing quotes.
What is the typical charge for a leaking pipe?
This Old House's plumbing cost guide, updated 06/06/2026, lists leaking pipes at $150 to $450, a ceiling pipe leak at $500 to $2,500, a main water line leak at $500 to $4,000 and burst pipes at $1,000 to $4,000. These come from a national guide, not local rates, and not what any plumber we arrange charges.
Access explains most of the gap. A leak at an exposed fitting lands at the low end. A line inside a wall or ceiling calls for opening the surface, mending the pipe and closing the opening again, which is where bills climb. The written quote sets the price, so ask if drywall repair counts as in or out.
Water damage is billed apart. The same guide puts damage repair from a leak at $1,000 to over $10,000 on top of the plumbing. Catching a leak early is the cheap move, and EPA WaterSense puts the loss from an average household's leaks above 9,300 gallons per year.
What does leak detection cost?
Leak detection runs $150 to $600, per This Old House's slab leak guide updated 04/07/2026. That pays for finding a leak nobody can see, using specialized tools, and This Old House points to video inspection as one way to pinpoint the spot. The figure is a national guide range.
Detection is cheaper than opening the wrong wall, so plumbers go first. Price tracks house size, how many lines need testing, and whether the leak lies in a slab, a wall or the ground. Ask if the fee is credited toward the repair when one business does both.
Not sure a leak exists? Why the bill is high with no visible leak describes a free meter test to run first.
How are slab leaks priced?
That slab leak guide gives an average of $2,300 within a $630 to $4,400 or higher range. Its table adds under-slab plumbing repair at $500 to $4,000, waterline repair at $300 to $1,400, broken piping repair at $200 to $2,000, and rerouting plumbing at $1,500 up to $15,000; HomeAdvisor is named as the data source.
Method moves the price most: seal the pipe, reroute it overhead, or open the slab. Finished flooring raises labor, and a cut slab needs patching.
The tradeoff is explained in repair or repipe for a slab leak, with more numbers in slab leak pricing. For the process itself, read finding and fixing slab leaks.
How is an outdoor leak handled?
A leak on the main line or a yard line is priced like other main-line leaks: $500 to $4,000 in This Old House's list, with digging doing most of the damage. No guide we read gave a figure for a hose bib or sprinkler leak, so rely on the written quote instead.
Signs of an outside leak include wet soil, lush patches, a meter that keeps spinning with all fixtures shut off, and lower pressure. Who owns which stretch of pipe matters, and your water supplier can tell you where its responsibility stops. Check with the water supplier listed on your bill, such as Riverside Public Utilities at (951) 782-0330, or the supplier serving your address.
Why do leak quotes differ so much?
Four drivers: location, what has to be opened, hours on the job, and the time of day. This Old House says after-hours calls bring a flat emergency fee plus an hourly rate close to $150, and that labor makes up most of a repair bill. Permits run around $75 in that guide.
Materials matter as well, since metal pipe costs more than plastic. Fixr's plumbing guide, updated January 30, 2025, lists typical hourly rates of $75 to $150 and service call fees of $50 to $300.
Older Riverside houses with galvanized or tired copper can show weakness beyond the first break, so a plumber may propose more than a spot fix. Leaking pipe repair explains where a repair stops being the right answer.
Does any of this apply to a car leak?
No. These figures come from household plumbing guides, and a coolant, oil or fuel leak in a car is priced by a mechanic, who inspects the vehicle first. If your leak is in a house, the ranges above are your starting point, and a written quote will give your own number.
What is the sensible next step?
Shut the water at the fixture or main if it is running, photograph what you see, and write down when you first noticed it. Then request a written quote and we pass it to a local plumbing business that inspects. Tell us where the damp appears and how long it has gone on.
If water is actively spreading, the burst pipe first-hour steps apply. The Rubidoux Ridge Plumbing home page lists everything else we cover. Many leak repairs pass $1,000, the point where California's contractor license rule begins for labor and materials, so get the license number and check it before work starts.
Common questions
How much time does a leak search need?
What belongs on my list of questions for the plumber?
Must I be present during the search?
Sources used
Page updated