Replacing a faucet costs about $150 to $600 in This Old House's 2026 plumbing guide, updated June 6, 2026. Fixr's bathroom sink guide, updated January 30, 2025, gives faucet installed prices by type, from $225 to $1,350. Those are national guide figures, not Riverside rates and not what we charge. The written quote sets the price. The services behind these prices are described under faucets, sinks, showers and disposals, and everything else we cover appears on the home page.
What is the price range for a faucet replacement?
The guides land in a wide band because a faucet job can mean a simple swap or a new sink setup. This Old House says $150 to $600. Fixr lists installed prices of $225 to $850 for a single-hole bathroom faucet, $230 to $650 for a centerset, and $280 to $1,350 for a widespread.
| Source and date | Job | Guide range |
|---|---|---|
| This Old House, updated Jun 6, 2026 | Faucet replacement | $150 to $600 |
| Fixr, updated Jan 30, 2025 | Single-hole bathroom faucet, installed | $225 to $850 |
| Fixr, updated Jan 30, 2025 | Centerset bathroom faucet, installed | $230 to $650 |
| Fixr, updated Jan 30, 2025 | Widespread bathroom faucet, installed | $280 to $1,350 |
| Bob Vila, Sep 13, 2023 (older) | Kitchen faucet, professional install | $260 to $480 |
These are guide figures only, and for your job the written quote sets the price.
What does a kitchen faucet swap cost with a pro?
Bob Vila's guide, from September 13, 2023, lists $161 to $364 for installing a kitchen faucet, with a national average of $261, and $260 to $480 when a professional installs it. That article is older, so it is a weaker guide than the 2026 This Old House range of $150 to $600 for faucet replacement in general.
The big swings come from the faucet you pick and from what is under the sink. A basic faucet swap with working shutoff valves is the low end. Add a pull-down sprayer, a soap dispenser or a new sink hole, and it rises. Old or corroded shutoff valves are a common surprise, since a plumber will not hook a new faucet to a valve incapable of closing.
What would repairing a leaky faucet cost versus replacing it?
No sourced guide price exists for a stand-alone faucet repair, so none appears here. A repair usually costs less than a replacement, since it is a cartridge or seal rather than a whole faucet. The Fixr plumber guide, updated January 30, 2025, lists typical hourly rates of $75 to $150 and a service call fee of $50 to $300.
If the faucet is a few years old and the body is sound, repair makes sense. If the finish is peeling, the faucet is corroded, or it has already been repaired, replacement is better value. The how-to on a single-handle faucet leak shows the repair, and the general dripping faucet guide covers other cases.
What should I expect to pay for a new shower valve or cartridge?
We found no readable guide price for a shower valve or cartridge, so we give none. A cartridge swap is a smaller job than a valve replacement. A valve replacement means opening the wall behind the shower, which adds drywall or tile repair, and it is why valve jobs vary so widely between homes.
Check with the plumber that the quote covers access, patching and any tile work. If the shower has weak flow or drips, read the pages on weak shower pressure, a dripping shower faucet and the shower leak page. A valve inside the wall can raise a permit question too, since the City of Riverside requires one for piping replaced inside the wall face or under the floor.
How much is a dishwasher installation?
No sourced price for a dishwasher install is available, so we offer no number. The job includes a water supply connection, a drain connection with a high loop or air gap, a power connection, and leveling the unit. A home with no existing connections needs added pipe and electrical work, and costs more.
Find out if the quote includes hauling away the old unit, a new supply line and drain hose, and an electrical hookup. The dishwasher empties into the disposal or the sink drain, so disposal work often comes up during the same visit; see garbage disposal installation and garbage disposal repair.
What raises or lowers a faucet replacement quote?
Faucet type and brand, the number of sink holes, corroded or stuck shutoff valves, an old or hard-to-reach sink, a new supply line or drain, and whether you or the plumber buys the faucet. Hard water also stiffens old valves: Riverside Public Utilities' 2025 report lists hardness averaging 197 mg/L, about 12 grains per gallon.
Providing your own faucet can lower the quote, though some plumbers will not warrant work on parts they did not supply. Faucet replacement is exempt from permits in the City of Riverside, per its handout, so no permit fee applies in the usual case. Compare two quotes by their line items. For the installation side of the price, see faucet installation costs.
Common questions
How long does faucet replacement take?
What should I clarify before hiring a faucet installer?
Do I have to stay home for the faucet replacement?
Can I buy the faucet myself and have a plumber install it?
Sources used
- Fixr, Bathroom Sink Cost, updated January 30, 2025
- Bob Vila, How Much Does It Cost to Install a Kitchen Faucet?, September 13, 2023
- This Old House, Plumbing Cost Guide: Repairs and Installations, updated 06/06/2026
- Fixr, Cost to Hire a Plumber, updated January 30, 2025
- City of Riverside, Work Exempt From Building Permits handout
Page updated